The heart of any Turbo system is the Manifold and the Turbocharger. These form the basis where the rest of the turbo system is built around. Turbo manifolds have only one, but the most critical purpose in turbo systems, and that purpose is to expel exhaust gas into the turbine of a turbocharger as efficiently as possible. Comes with 1 set of T4 turbo flange configuration manifold with O2 sensor insertion.
Header tip diameter : 2.63".
Down pipe tip diameter : 2.94" / 1.41".
Flex pipe tip diameter : 2.275".
Tubular design. Ensures equivalent exhaust flow rate from each cylinder.
Provides better fuel efficiency. Improves throttle and torque response.
Increases additional 10-15 horsepower approximately.
Comes with turbo manifold, gaskets, bolts, nuts and necessary hardware for installation.
Professional installation is highly recommended.
There is no match for power and performance for tubular stainless steel manifolds. Tubular manifolds are made up of runners coming from each cylinder, meeting up at a collector. Tubular manifolds yield a higher efficiency rate, as each runner is generally the same circumference. This tubular manifold furthers the even exhaust flow using "equal length" runners. Equal length tubular manifolds are the most efficient design, which ensures equivalent air flow rate smoothly from each cylinder. This allows for a much smoother flow of exhaust gas to the turbo.
1979-1995 FORD MUSTANG 5.0L V8 ENGINE T4 TURBO FLANGE MODELS ONLY